For securing the moulds, the 105m long beds have a 50mm increment pattern of holes, every 1000mm, on both sides of the bed.

The moulds are engineered based on our standard hydraulic shrinking box moulds, ensuring precision and efficiency in precast lift shaft production.

Tilting tables for the production of fair-faced andexposed aggregate wall panels.

X and V-shaped structural elements in architectonic concrete for the facade of a school building in Antwerp.

These highly versatile moulds are adjustable in length, width, and height, providing flexibility for various production needs.

This rigid steel mould is designed to produce beams with a height of 445mm and a width of 300mm.

3 Bibat battery moulds with hydraulically moveable panels and bases.

Circulation plant with a capacity of 20 pallets.

These 3 complete sets, including panels and accessories are fully interchangeable.

The capacity was expanded with self-reacting and nonreacting beds with moulds for girders, purlins, IV-beams and bridge beams.

Tilting tables, lift shaft mould and self-reacting and non-reacting beds with moulds for girders, purlins, IV-beams and bridge beams.

This work involves 12 moulds for the prefabrication of 2,5m long box-culverts.

Due to the detachable corner chamfers and extra shrinkable corners, this Flexbox mould is suitable to make single and double lift shafts, stair cores as well as culvert sections for silos.

Installation of 2 identical stair moulds with 24 steps.

The mould is equipped with sensors and electronic valves to ensure the correct sequence of the hydraulic movements during demoulding.

Installation of multiple and different types of stair moulds

This highly efficient and adaptable system enables the seamless casting of precast substations, ensuring precision, durability, and optimized workflow.

Hydraulically retractable mould for 20000L and 15000L rainwater tanks.

Shrinkable inside mould with retractable outside mould for standard pedestrian bridge.

5 complete moulds to manufacture U-shaped water drainage channels.

Construx-Weckenmann designs and produces moulds for large series of precast insulated facade elements.

The basements are not conical but fully rectangular with sharp 90° angles in between the walls and the floor. All inner moulds shrink hydraulically and all outer moulds open manually.

Various moulds for single and double precast concrete burial vaults and for single, triple and 12-fold columbariums.

Construx-Weckenmann supplied the adjustable moulds for all precast facade elements of the prestigious China Belgian Technology Centre (CBTC).

Two hydraulically retractable moulds for 15000L and one for 20000L rainwater tanks.

Various types of moulds for precast motorway barriers.

High-quality steel moulds are essential in the production of precast lift shafts, ensuring precision, efficiency, and durability

Manufacturer of high-end wastewater treatment systems applies to Construx-Weckenmann for a new production line.

3 non-reacting prestressing lines with 2 complete sets of modular moulds for different types of IV roof beams with small or large bulges, from 18m up to 36m.

Architectural facade elements for the new hospital of Kortrijk: both first and second phases.

Modular and removable self-reacting beds to produce prestressed elements. A total of 4 beds with each an overall length of 86m and a usable length of 80m.

Construx-Weckenmann supplied 2 very wide 500T self-reacting frames to accommodate timber or steel moulds, without any need for foundation works or special anchors to hold the frame down.

Construx-Weckenmann supplies 3 self-reacting moulds of 600T each for the production of TT floor elements.

Construx-Weckenmann supplies 2 self-reacting moulds with a net length of 75m each.

This versatile stair mould allows to cast 2150mm wide stairs with cut-back finish.

4 moulds to manufacture specific sizes of circular manholes.

The tanks are cast upside-down and heavily vibrated.

This project features 3 production lines for fair-faced and exposed aggregate wall panels.

This precast facility has 2 overhead type wall battery moulds for producing fair-faced concrete walls.

This 60m long and 8m wide frame consists of rails which serve as support and fixation for modular bridge beam moulds.