3D moulds for precast oil interceptors

Modular Design for Flexibility.

• The inner core’s minimum dimensions are formed using four base sections.
• Width adjustments are achieved using segments of 250mm, 500mm and 1000mm, allowing for precise 250mm increments.
• Core length adjustment from 5500mm to 7000mm is managed via intermediate segments of 500mm and 1000mm.
• The inner core segments are tensioned together, minimizing the number of fastenings.
• The formwork is mounted on a base frame, elevated 400mm to allow access beneath the inner core.
• Longitudinal and front outer jacket are designed for maximum dimensions and are hydraulically opened and closed, with mechanical locking via centring screws and spindles at the top and bottom.
• The second front outer jacket consists of two base panels with variable lengths, expandable with one or two extensions, maintaining a 250mm modular system for outer jackets as well.
• Hydraulic cylinders on the outer jackets can be adjusted to two or three positions depending on the core’s width.
• Hydraulic controls for the outer jackets are operated via manual lever valves located at the base corner of the mould.
• The four core base segments include integrated compressed air connections for enhanced operational efficiency.

Show more of:

• 3D Elements
• Germany

Linked products

Moulds for basements and pits