Adjustable 3D mould with covers

The inner core has the same principle as the standard flexbox mould system. The outer walls are mounted on rollers and can be manually opened and closed.

  • The outer end wall and longitudinal outer walls are designed to accommodate the maximum required length.
  • The inner end wall is set to the smallest width and adjusted with spacer elements to achieve the required width.
  • To produce fully enclosed containers with a 200mm thick base, a total of nine steel covers are provided in various sizes. These covers are placed on the inner core elements, centred, and tensioned, resulting in a small recess at the base edges of the finished element.

Specifications:

  • Minimum inner core dimensions: 1500mm x 1500mm
  • Maximum inner core dimensions: 2000mm x 2500mm
  • Maximum element height (inner core): 2200mm
  • Wall thicknesses: 160mm and 180mm
  • Ceiling/Base thickness: 200mm
  • Inner core segments (longitudinal side): 2 x 300mm, 500mm and 1000mm per side
  • Inner core segments: 2 x 300mm and 500mm per end side
  • Hydraulically operated shrink corners for efficient adjustment
  • 2 x 4 steel base corners for 160mm and180mm element thickness. Wooden inserts used to close gaps between steel base corners
  • Adjustable height system for element heights from1000mm to 2200mm, using base supports and feet
Get more out of our website by using cookies

Our website uses cookies to, among other things, give you the best user experience and to track visitor statistics.

I accept all cookies Refuse cookies Set up your preferences