Belgium Modular and adjustable side-forms for prestressed elements
4 Non-reacting beds with flexible girder moulds
For securing the moulds, the 105m long beds have a 50mm increment pattern of holes, every 1000mm, on both sides of the bed.
Self-reacting moulds
Auto-reactive 5-gang mould for girder production
This rigid steel mould is designed to produce beams with a height of 445mm and a width of 300mm.
Self-reacting frames and beds
Expanding the prestress production capacity of a customer
The capacity was expanded with self-reacting and nonreacting beds with moulds for girders, purlins, IV-beams and bridge beams.
Mould for a prestressed pedestrian bridge
Shrinkable inside mould with retractable outside mould for standard pedestrian bridge.
Non-reacting lines with modular roof beam moulds
3 non-reacting prestressing lines with 2 complete sets of modular moulds for different types of IV roof beams with small or large bulges, from 18m up to 36m.
Self-reacting casting beds for beams and columns
Modular and removable self-reacting beds to produce prestressed elements. A total of 4 beds with each an overall length of 86m and a usable length of 80m.
Self-reacting frames for floor slab systems
Construx supplied 2 very wide 500T self-reacting frames to accommodate timber or steel moulds, without any need for foundation works or special anchors to hold the frame down.
Self-reacting moulds for TT floor elements
Construx supplies 3 self-reacting moulds of 600T each for the production of TT floor elements.
Self-reacting moulds for TTT roof elements
Construx supplies 2 self-reacting moulds with a net length of 75m each.
Wide multifunctional non-reacting line for bridge beams
This 60m long and 8m wide frame consists of rails which serve as support and fixation for modular bridge beam moulds.
